[AIOT] Set Up the Console Port for IMX8P-IM-A

ASUS Support FAQ

FAQ

Product IMX8P-IM-A, IMX8P-IM-A R2.0

1. On the IMX8P board - Set up for console debug

Connect IMX8P to PC with a USB serial cable

2. Software setting on the IMX8P board - IMX8P-config

1. Type ”IMX8P-config” in terminal to enter IMX8P Software configuration Tool

2. Select item 3: Serial

3. Select “Yes”

4. Select “OK”

5. Select "Yes" to reboot the system

6. Open Putty and select Serial on the PC, and the Serial line can be checked from Windows >Device Manager >Ports (COM & LPT). The speed is 115200 baud.

7. To set up the putty log file

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ

南宫28

FAQ

1. On the IMX8P board - Set up for console debug

2. Software setting on the IMX8P board - IMX8P-config

Was this information helpful?