[AIOT] Resize Image for Tinker Board 3N

ASUS Support FAQ

FAQ

Product Tinker Board 3N

1. Connect Tinker Board 3N to PC via USB-C

2. Power on Tinker Board 3N and enter UMS mode

Note: If want to resize eMMC image, please power on Tinker Board 3N and enter SD card UMS mode.
• microSD card: With another Debian installed (It could be flashed an image thru Etcher or Win32DiskImager under Windows environment or dd under Linux.)

3. Download tinker_resize.sh and dump image from eMMC with dd command

sudo dd bs=4M if=/dev/sdX of=/path/xxx.img

4. Use tinker_resize.sh to reduce image size

chmod +x tinker_resize.sh
sudo ./tinker_resize.sh xxx.img

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ

南宫28

FAQ

Was this information helpful?