[AIOT] How to Clear CMOS header for Q670EI-IM-A

ASUS Support FAQ

FAQ

Product Q670EI-IM-A

[AIOT] How to Clear CMOS header for Q670EI-IM-A

Please follow the steps described below

1. Turn OFF the computer and unplug the power cord
2. Short-circuit this jumper with a metal object or jumper cap for about 5-10 seconds
3. Plug the power cord and turn ON the computer
4. Hold down the <Del> key during the boot process and enter Bioses setup to re-enter data

This header allows you to clear the CMOS RTC RAM data of the system setup information such as date, time, and system passwords

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ

南宫28

FAQ

Was this information helpful?