[AIOT] Console Port Set Up for PE1100N

ASUS Podrška ČPP

FAQ

Proizvod PE1100N

When PE1100N console port is connected to a PC, it is possible that a USB to UART Bridge exclamation mark may appear in Device Manager.

The baud rate is 115200

In this case, you need to install the following driver (F81232_231115_whql.zip). After restarting, you will be able to use the console port to read logs normally

Yes No

Obratite se podršci

Ako gornje informacije ne mogu da reše vaš problem, javite nam se

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.

ASUS Podrška ČPP

O kraja do vrha