[Gaming Chassis] ROG Strix Helioses / ROG Strix Helioses Ⅱ Case Glass Side Panel Replacement

Notice

1. Kindly wear gloves to protect your hands before proceeding with disassembly or assembly. Pay special attention to the corners of the parts to avoid any scratches.
2. When the side panel or front panel is made of glass, please handle it with extreme care during disassembly to avoid any collisions, falls, or undue stress.
3. When disassembling, please lay the casing flat on a stable surface to prevent the side panel from falling during the process.
4. Kindly ensure that the relevant wires are neatly arranged during assembly to prevent any damage to the wires throughout the process. 
5. Keep track of all screws and small components during disassembly and assembly to avoid losing any parts

Disassemble the side panel

   Note: Please put the case on a flat table to prevent the side panel from falling during disassembly and assembly. 

             Please handle with care when disassembling and assembling the glass side panel to avoid collision/drop/heavy pressure.

Press the button on the back of the chassis and the panel will be release, lift up the panel to remove.

Assemble the side panel

   Note: Please put the case on a flat table to prevent the side panel from falling during disassembly and assembly. 

             Please handle with care when disassembling and assembling the glass side panel to avoid collision/drop/heavy pressure.

Hold the panel and put lower edge of panel into the panel groove at the bottom of case, then push panel upper edge into the latch on top of case until hearing [click] to close panel.